Turn a link into something tangible.

A white rounded plate with a raised black QR layer, sized in millimetres and ready for your slicer.

Destination URLText above QR (optional)Raised in black using a print-friendly block font. Up to 18 characters. Center icon (optional)Uses high QR error correction and a protected white window around the raised center mark.

Width

QR area height

White base height

Quiet border

Corner radius

Combined height

2.20 mm

Raised black top height0.6 mm0.2 mm · subtle1.2 mm · proven2.0 mm · bold

Embedded P2S filament profiles

The 3MF stores the actual temperature, flow, cooling, wipe/retraction and volumetric-speed values. These names are labels shown in Bambu Studio; they no longer need to exist as installed presets.

White base labelBlack top label

White PLA-Basic: 220°C · flow 0.98 · max volumetric 21 mm³/s

Black ePLA-Lite: 210°C · flow 0.98 · max volumetric 12 mm³/s · extra wipe/retract

Add rounded hanger topRounds the full plaque width into a seamless dome with a 11.0 × 3.2 mm pill-shaped through-hole.

Compact 2.0 mm safe space selected. The formal QR recommendation is 4 modules.

Live preview

38 × 38.0 mm

Layers

2 colors

Grid

25 × 25

Module

1.36 mm

3MF uses one printable mesh with Bambu face-painted black QR surfaces. STL has no color; add a filament change where the raised layer begins.

P2S Bambu Studio preset

Nozzle/layer: 0.4 / 0.20 mm

Walls: 2 loops + tiny gap fill

Infill: 15%, top 5 / bottom 3

Surface: Ironing 20% · 30 mm/s

Materials: embedded eSUN PLA profiles

AMS: prime tower enabled